Sulfur hexafluoride detector
25 February, 2008 | Ampcontrol Pty Ltd
The Austech SF6 leak detector is an extractive gas sampling system designed for the continuous detection and monitoring of sulfur hexafluoride (SF6) gas leaks. The product houses an in-built gas sensor which is designed to enhance the detection sensitivity of SF6.
Environmental data reporting program
25 February, 2008 | Ecotech Pty Ltd
Ecotech has released an environmental data reporting program called WinCollect v4.0 that is claimed to offer users improved ease of use, increased robustness and more user-defined options.
Print control software
25 February, 2008 | Print Associates Asia Pacific Pty Ltd
A single office worker can print out up to 15,000 A4 sheets of paper a year. By a conservative estimate, a business of, say, 5000 people creates 65 t of CO2 through the paper they use each year.
Heavy-duty bin lifter
25 February, 2008 | Wastech Engineering Pty Ltd
The Liftezy is a heavy-duty bin lifter for lifting and tipping of all MGB bin sizes.
Oxygen analyser
25 February, 2008 | Novatech Controls Pty Ltd
The 1630 oxygen analyser has been redesigned to take advantage of advances in solid-state electronics. The new series 1730 has a greater range of features while still retaining its ease of use.
Scott Proton ZM gas monitor
24 February, 2008 | Scott Safety
The Scott Proton ZM (Zero Maintenance) provides up to two years of continuous and maintenance-free protection from exposure to hydrogen sulfide (H2S) or carbon monoxide (CO).
Photometric converter
23 January, 2008 | Lear Siegler Australasia Pty Ltd
The Optek C4000 is a photometric converter engineered for performance and advanced multifunction process monitoring and control. It supports bi-communication, 4-20 mA, four relay outputs and eight I/O product/range changes. It has a built-in data logger and split graphical/numerical displays.
Particle counter for oil
23 January, 2008 | Particle & Surface Sciences Pty Ltd
The Pola 200 particle counter is suitable for a wide range of both aqueous and non-aqueous liquids.
LDO sensor
23 January, 2008 | Aqualab Scientific Pty Ltd
The Hach/Hydrolab LDO sensor is approved by the EPA. It uses a sensor cap that is coated with a luminescent material. Blue light from an LED strikes the luminescent chemical on the sensor, which instantly becomes excited. As the excited chemical relaxes, it releases red light. The higher the oxygen concentration, the less red light given off by the sensor cap. The red light is detected by a photo diode. The time it takes for the chemical to return to a relaxed state is measured.
USB charger for battery
23 January, 2008 | Sanyo Oceania Pty Ltd
Sanyo has expanded its eneloop rechargeable battery range with the launch of a USB charger set, the NCMDU01, which allows users to charge the batteries via a USB port commonly found on personal computers and laptops.
Vortex flowmeters
23 January, 2008 | Endress+Hauser Australia Pty Ltd
Proline Prowirl 72/73 flowmeters can be used for the accurate and reliable measurement of steam.
Data acquisition and analysis
23 January, 2008 | Thermo Fisher Scientific
The Dimension 4i from LDS Test and Measurement is a data acquisition system that combines high-speed, gap-free data recording with real-time FFT analysis. The time and frequency domain system brings together the technologies of Nicolet, Gould and Dactron.
Waste rippers
23 January, 2008 | ITs Green
Satrind T200 and T400 waste rippers used to process bulky hard waste or household waste to a form that allows it to be used as an alternative fuel stream or for further processing such as optical separation or sorting.
Backflow prevention device
23 January, 2008 | Philmac Pty Ltd
The Watts Water Technologies range of backflow prevention devices stops the reverse flow of contaminated water in piping systems from entering the potable water supply.
Hydrogen and inert gas analyser
23 January, 2008 | Siemens Ltd
The Calomat gas analyser detects the concentration of hydrogen and inert gases in corrosive gases. It measures gas components such as H2, N2, Cl2, HCl or NH3 in binary or pseudo-binary mixes. It is therefore suitable for measuring tasks such as those found in chlorine-alkali electrolysis, steel production and processing, ammonia synthesis, fertiliser production, and also in LNG (liquified natural gas) plants.
