Products

Tsurumi KTV submersible dewatering pumps

24 September, 2010 | Australian Pump Industries Pty Ltd

The KTV series of heavy-duty submersible dewatering pumps manufactured by Tsurumi Pump is designed to provide the construction and mining applications with reliability. The series provides capacities of up to 2300 L/min flow and heads as high as 50 m. The complete series of pumps with bores from 50 mm (2), all the way through to 150 mm (6) are available in three-phase, 2-pole configuration and standard cast iron body construction.

KSB Amamix and Amaprop mixers

24 September, 2010 | KSB Australia Pty Ltd

The direct-drive Amamix series mixer range now comes with higher efficiency, greater achieved flows and increased thrust. The range features an ever clean blade (ECB) propeller design which offers varying pitches and sizes to 630 mm diameter. It also has the added advantage of a reduced diameter hub, tapered seal chamber and three-fold dynamic sealing, including lip seal protection and dual silicon carbide mechanical seals. All these features combined reduce the likelihood of propeller ‘ragging’ and/or mechanical seal failure.

Dimension Data eWaste management service

24 September, 2010 | Dimension Data Australia

Dimension Data has launched its eWaste management service, a national program that offers environmentally responsible removal, disposal and recycling of electronics materials, ranging from the packaging materials for new products when they are delivered, to equipment at end of life.

Aerzen Delta Hybrid rotary lobe compressor

24 September, 2010 | Hurll Nu-Way Pty Ltd

The Aerzen Delta Hybrid rotary lobe compressor combines rotary lobe blower and screw compressor technologies. The unit has been designed for oil-free compression of air and neutral gases and finds application in varied industries, such as wastewater treatment plants, food and chemical industries, power generation plants and the pneumatic transport of powders.

ABB WaterMaster flowmeter and VeriMaster in-situ verification

24 September, 2010 | ABB Australia Pty Ltd

The electromagnetic WaterMaster flowmeter which is designed specifically for the water, wastewater and effluent sewage markets now has an in-situ flowmeter verification capability. Built into the flowmeter the VeriMaster system has the ability to perform in-situ verification across the full range.

Mercoid series 3100 smart pressure transmitter

16 September, 2010 | Dwyer Omega (Aust) Pty Ltd

The Mercoid series 3100 smart pressure transmitter is a microprocessor-based high-performance transmitter which has flexible pressure calibration and push-button configuration, and is programmable using HART communication.

Dimpleflo modular heat exchangers

20 August, 2010 | Teralba Industries Pty Ltd

The Dimpleflo modular heat exchangers can be used to recover energy from any warm or hot product or effluent.

Copa SAF wastewater system

20 August, 2010 | Ovivo

The Copa submerged aerated filter (SAF) wastewater system is designed for the ‘packaged sewerage treatment’ market. It has been modified by EWT to suit Australian requirements.

Ilmap sand filter nozzles

20 August, 2010 | Tecpro Australia

Ilmap filter nozzles are used in the treatment of drinking water, demineralisation, urban and industrial wastewater treatment, desalination plants and the filtration of water for irrigation and swimming pools.

Source Catchments eWater integrated water modelling suite

20 August, 2010 | eWater Limited

Applying a whole-of-catchment approach to water management is now possible with Source Catchments, the first component of eWater’s integrated water modelling suite, eWater Source, to be publicly released.

FCI ST98L in-line mass flowmeter

20 August, 2010 | AMS Instrumentation & Calibration Pty Ltd

The ST98L in-line mass flowmeter from Fluid Components International (FCI) provides a reliable flow measurement solution for virtually any air or gas mixture in small process line sizes from 25 to 50 mm.

GDS404 gas alarm

20 August, 2010 | Anri Instruments & Controls Pty Ltd

The GDS404 is a 1-4 channel gas alarm from GDS Technologies. The versatile system configuration for monitoring any combination of oxygen, combustible and toxic gases meets the requirements for economical and reliable monitoring of gas levels. The unit comes in a steel housing, monitoring in any type of environment from commercial premises through to heavy industrial and hazardous area applications.

SF6 leak detection, thermal imaging and daytime corona imaging service

20 August, 2010 | Mondo

Select Technical Solutions (a division of SP AusNet) has an SF6 leak detection, thermal imaging and daytime corona imaging service that provides added value to greenhouse abatement and asset management plans.

Campbell Scientific EC150 analyser and CSAT3A sonic anemometer

19 August, 2010 | Campbell Scientific Aust Pty Ltd

The EC150 in-situ open path analyser is designed for eddy covariance flux measurements. As a stand-alone analyser, it simultaneously measures absolute carbon dioxide and water vapour densities, air temperature and barometric pressure. With the optional CSAT3A sonic anemometer head, the device also measures three-dimensional wind speed and sonic air temperature.

Dwyer Instruments PBLT2 submersible level transmitters

17 August, 2010 | Dwyer Omega (Aust) Pty Ltd

The PBLT2 submersible level transmitters measure the height of liquid above the position in the tank, referenced to atmospheric pressure.

  • All content Copyright © 2024 Westwick-Farrow Pty Ltd