Eletro-pneumatic positioner
28 January, 2007 | Burkert Fluid Control Systems
The SideControl Positioner Type 8635 is an electro-pneumatic positioner designed for use with pneumatically-actuated process valves, with linear or part-turn actuators. Operating with a wide ambient and media range -25 to +60°C, and pressure 1.4 to 6 bar, the device has an airflow capacity of 55 L/min (at 1.4 bar), a linear range 3-130 mm and part-turn actuator range 0-120°.
Particle size analyser
28 January, 2007 | Particle & Surface Sciences Pty Ltd
The Elzone II 5390 Particle Size Analyser is developed by Micromeritics. Widely accepted as a primary particle characterisation technique, the electrozone sensing principle is recognised as an effective method of counting and sizing a wide variety of organic and inorganic materials.
Pipe repair bandage
28 January, 2007 | Marine & Industrial Marketing
Rapp-it Pipe Repair Bandages are now available in a smaller size, measuring 50 mm x 1.5 m. It is suitable for repairing smaller pipes that measure up to 40 mm in diameter. For larger pipes, the bandages are available in a range of four larger sizes.
Pulse valve for dust collectors
28 January, 2007 | Dwyer Omega (Aust) Pty Ltd
Diaphragm pulse valves for pulse jet dust collectors are constructed of robust die-cast aluminium with NBR diaphragms. The valves come in a choice of either the series DCV with an integral solenoid coil or the series RDCV that are to be used with a remote solenoid.
Campbell Scientific CR800 series data loggers
28 January, 2007 | Campbell Scientific Aust Pty Ltd
The CR800 series data loggers are a complete measurement and control system designed to take over from the previous CR510 data logger. The two data loggers are suitable for small to medium long term or remote applications, but with added peripherals can be used in large projects.
Wet/dry pumping system
28 January, 2007 | Esam Australia
Turbo Smart is a wet/dry vacuum pumping system that constantly senses/monitors the negative pressure generated and adjusts the speed of the vacuum pump to maintain consistent performance, regardless of the ratio of air to liquid being aspirated.
Components for sedimentation and clarification
28 January, 2007 | Dotmar EPP Pty Ltd
A plastic and metallic components range from Dotmar EPP is used for clarification systems and sedimentation tanks used by the water, wastewater and industrial, mining and municipal recycling industries.
Urban stormwater management manual
20 December, 2006 | EA Books
The manual titled Australian Runoff Quality: A Guide to Water Sensitive Urban Design was prepared by Engineers Australia's National Committee for Water Engineering and published in March this year by Engineers Media.
Office paper recycling
20 December, 2006 | Paper To Paper International
Paper To Paper has designed and manufactured a recycling system for office paper to eliminate the need for multiple bins and simplify daily waste disposal.
Waste exchange database
20 December, 2006
A waste exchange database, developed by the Victorian Waste Management Association (VWMA) with support from EPA Victoria, is designed to assist users with the diversion of waste, and in particular prescribed industrial waste or hazardous waste from landfill, by promoting its reuse and recycling.
Water-saving device
20 December, 2006 | Aqua-technique
A large quantity of water is wasted from hot water outlets while waiting for the hot water to arrive. Using the Aqua-technique water saver system, this water is re-circulated, saved and reused, so that it is not lost.
iTrans monitor
20 December, 2006 | Industrial Scientific Corporation
The stainless steel iTrans monitor for fixed-point gas detection is built to withstand corrosion. The monitor is suitable for installations in harsh environments such as offshore drilling platforms, chemical plants or applications near a saltwater coastline.
Graphics-based waterhammer program
19 December, 2006 | Accutech 2000 Pty Ltd
The Hytran program uses extensive graphics to show the pressures associated with waterhammer and has been developed specifically for analysing the pipe systems used in the water and wastewater industry.
Level and flow measurement
19 December, 2006 | Endress+Hauser Australia Pty Ltd
The Prosonic S FMU90 is a heavy industry ultrasonic level and open channel flow measuring system. It is suitable for accurate level measurement of bulk liquids and solids and replaces the Prosonic FMU 860/1/2 family.
Charge analysis system
19 December, 2006 | IDM Instruments
The AFG Analytic, Charge Analyzing System (CAS) determines cationic/anionic and acid/base demands of aqueous charge systems.
