Dust control

The Unimaster dust control unit offers a solution for dust problems encountered during industrial processes.

Contaminated air from the dust generation source is drawn through the inlet to the filter by the fan. Initially some pre-separation takes place as heavier dust particles lose momentum and fall into the collection bin or hopper.

Finer dusts are carried up to the filter elements where they are retained on the surface of the filter fabric. The cleaned air passes through the filter fabric into the fan chamber and is discharged back to atmosphere.

For cleaning, when the fan is switched off the filter fabric cleaning cycle is automatically activated. The dust is dislodged from the filter elements by the oscillating motion of the shaker motor and falls into the collection bin below.

The unit is suitable for intermittent operations in plant processes. Several small self-contained units can be placed at the points of dust generation. This approach results in total dust capture and flexibility of operation.

The range is versatile, it has more than 500 combinations and numerous ancillaries. The compact technology uses a flat envelope-shaped, multipad filter to provide maximum fabric area for minimum floor space.

A range of filter fabrics suits any application. The fan design results in reduced noise levels and enhanced efficiency and performance. Its controller makes it easy to install/connect and ensures the filtration efficiency is properly maintained. There is no requirement for compressed air.