Dwyer Series 629C wet/wet differential pressure transmitter
01 October, 2017The Series 629C wet/wet differential pressure transmitter monitors differential pressure of air and compatible gases and liquids with 0.5% accuracy.
Transforming communities and creating smart spaces with the IoT
15 September, 2017Partnering with Telstra on a trial project, the City of Joondalup set specific goals aimed at transforming Tom Simpson Park, Mullaloo, into a smart park by embracing the IoT.
Geotech BIOGAS 3000 fixed analyser
01 July, 2017The IECEx Geotech BIOGAS 3000 fixed analyser, built on robust gas analysis technology, is suitable for anaerobic digestion (AD) and landfill sites monitoring.
Blackline Safety lone worker range
01 May, 2017Thermo Fisher Scientific is introducing a lone worker product range from Blackline Safety.
Honeywell HPM series particle sensor
18 April, 2017The HPM series particle sensor is designed to work in heating, ventilation and air conditioning (HVAC) systems, and consumer products such air purifiers, to measure air quality in homes, buildings and public spaces.
Melbourne streetlights turning into air monitors
08 December, 2016The EPA Victoria and CitiPower are collaborating on a trial to convert Melbourne's streetlights into air monitoring stations, having recently attached air quality sensors to two light poles at each end of the Queens Bridge.
Michell Instruments XTC601 gas analyser for hydrogen-cooled generators
21 October, 2016Michell Instruments has added an analyser dedicated to monitoring hydrogen-cooled electricity generators to its current range of moisture and oxygen analysers. The XTC601 has been designed with three phase profiles to cover all of the gas analysis requirements for operation and maintenance.
Fluid Components International ST51A and ST75A thermal mass flow meters
17 October, 2016ST51A and ST75A thermal mass flow meters from Fluid Components International (FCI) have been evaluated by safety expert Exida and found to meet SIL 1 compliance.
ecom-J2KN series emissions analyser
26 September, 2016The J2KN series analyser utilises electrochemical sensors to measure exhaust emissions — most commonly O2, CO, NO, NO2 and SO2 gases — and has an available NDIR bench for measuring CO2, high CO and CH4.
Industrial Scientific iNet Control v7.0 gas detector software
31 August, 2016Industrial Scientific has introduced an updated data environment for users of its iNet Control hosted software for managing gas detector fleets. The product improves safety by presenting data more effectively to help manage people, hazards and equipment.
EYEfi Smart Sensors give councils the information they need to improve waste management, save money and help keep rubbish off the streets
02 August, 2016Australia's growing population poses a challenge for councils. Smart and sustainable solutions are needed to better manage waste, especially in busy urban environments. Thanks to new internet-connected devices, smart sensors are starting to transform the world of waste and asset management for the better.
Dwyer Instruments Series PMT2 Particulate Transmitter
30 May, 2016The Series PMT2 Particulate Transmitter, from Dwyer Instruments, is designed to measure particulate emission levels from dust collector discharge.
AquaGas MAMOS multigas analyser
11 May, 2016AquaGas introduces the MAMOS multigas analyser. The MAMOS concept has been developed to minimise the installation and ongoing operation cost until now required to fulfil monitoring needs.
Emerson Rosemount CT5100 hybrid laser analyser for continuous gas analysis
11 May, 2016The Rosemount CT5100 continuous gas analyser is claimed to be the world's only hybrid analyser to combine tunable diode laser (TDL) and quantum cascade laser (QCL) measurement technologies for process gas analysis and emissions monitoring.
Emerson Micro Motion Advanced Phase Measurement software option
04 May, 2016Emerson Process Management has introduced Micro Motion Advanced Phase Measurement (APM), a software option available on the Model 5700 Transmitter. The software helps improve measurement accuracy across diverse industries in challenging multiphase applications.
