Keller DCX data loggers for hydrostatic level measurements
Keller offers probes to monitor groundwater levels and filling levels in tanks that can be used under a wide range of conditions. The probes provide fully autonomous operation or they can be used with an integrated data logger, wireless transmission (GSM), ambient pressure-compensating capillary or a separate absolute pressure sensor. Probe diameters of 16, 18 and 22 mm are available.
The DCX-16 can be used in locations where every millimetre counts. The product, which is screwed into position and fully watertight, operates as an autonomous battery-powered data collector with an absolute pressure sensor. In shallow water, a barometer can be used for separate recording of the barometric pressure on the surface. The differential pressure and/or the filling level are then calculated in the PC by subtraction of the time-stamped measurement data from the individual loggers.
The fully welded DCX-18 is designed as an autonomous level logger for long-term measurements of level and temperature, with rechargeable accumulator-type batteries. The microprocessor electronics compensate for linearity and temperature deviations by the pressure sensor. Different operating modes, with an absolute pressure sensor or an overpressure sensor with a pressure-compensating capillary, can also be supplied. The measurement data are stored in a nonvolatile memory. The batteries are fast-charged every time data are extracted via the charging/read-out plug.
DCX-22 AA level loggers register and compensate for fluctuations in the local barometric pressure with a watertight air pressure sensor that is fitted on the top end of the sounding tube. The devices are resistant to conditions of use in a damp environment and will not be damaged by brief flooding. The electronic equipment registers the signals from the high-precision pressure and temperature sensors, corrects linearity or temperature deviations according to a mathematical model and records the values to the internal memory. The built-in battery has a lifetime of 10 years.
Phone: 0011 41 52 235 25 25
ECD OIW80 oil-in-water analyser
The analyser is designed to precisely measure oil over a wide range of 0 to 30 ppm (mg/L) and can...
Armstrong Design Envelope Permanent Magnet (DEPM) pumps
Armstrong Fluid Technology has introduced its extended range of Design Envelope Permanent Magnet...
eWater Systems sustainable cleaning and sanitising system
eWater Systems are designed to replace chemicals by supplying disinfectant, sanitiser and cleaner...