Dynafluid 2000 steam and water mixing valve

Utilise plant steam to provide instantaneous hot water with the Dynafluid 2000, a steam and water mixing valve now available from Tecpro Australia. The product combines steam with cold water to deliver a constant flow of hot water without the need to install expensive and complicated water heating and pumping systems. Simply select the temperature required and the spring-controlled valves will ensure an even and consistent flow.

The steam inlet valve is controlled directly by the cold water pressure, opening only when water is flowing into the chamber. As soon as the cold water pressure in the chamber drops below 1 bar the steam valve shuts off completely, ensuring that steam cannot escape through the outlet.

The valve is available in four different sizes, from 15 to 40 mm, for flow rates up to 350 L/min and operating pressures from 0.5 to 6 bar. The smaller two valve sizes are suitable for hose washdown stations, spray balls and jetting tank washers. The larger two valve sizes are suitable for tank filling and multipoint applications, where higher flow rates are required.

The product is also available in a variety of finishes, including stainless steel for hygienically controlled environments. The internal parts are constructed from robust, heat-resistant thermoplastic polymers, giving the valves a long operating life in harsh environments. Should maintenance ever be necessary, the valve is easy to service without removing any pipework, and a range of spares is available. An optional temperature gauge and hose rack are also available.