AXIOMA Metering QALCOSONIC F1 (IP65) ultrasonic water meter
The QALCOSONIC F1 (IP65) ultrasonic water meter by AXIOMA Metering measures cold and hot water consumption in a residential, commercial or industrial setting.
The device has been granted a German Cooling Approval Certificate by the German National Metrology Institute (PTB), meaning that, in the EU, the water meter can be used for heating and cooling energy accounting.
The unit uses an M-Bus communication protocol and is equipped with an 8-digit LCD, with special symbols to display parameters, measurement units and operation modes. The following information can be displayed on the device: integral and instantaneous measured parameters; archived data and set-day data; device configuration information; and programmable LCD display parameters.
Product features include a nominal flow rate per 100 m3/h and a dynamic range up to Q3/Q1 = R 250/400. Communication modules include M-Bus, CL, WM-Bus 868 MHz, Modbus RS485, MiniBus, LORA and Bacnet.
Phone: 03 9017 8225
ECD OIW80 oil-in-water analyser
The analyser is designed to precisely measure oil over a wide range of 0 to 30 ppm (mg/L) and can...
Armstrong Design Envelope Permanent Magnet (DEPM) pumps
Armstrong Fluid Technology has introduced its extended range of Design Envelope Permanent Magnet...
eWater Systems sustainable cleaning and sanitising system
eWater Systems are designed to replace chemicals by supplying disinfectant, sanitiser and cleaner...
