Phoenix Contact RBTM solution for wind turbine rotor blades
The RBTM (Rotor Blade Tension Monitoring) solution from Phoenix Contact continuously monitors the oscillations of wind power installation (WPI) rotor blades.
As a result of increasingly longer blades, the systems monitoring loads and oscillations must keep up with rising demands. The monitoring solution utilises strain gauges glued into the rotor blades. These sensors provide measuring data for calculating the mechanical stress imposed on the rotor blades.
Freely programmable digital outputs can be used to transmit an alert signal in the event that configured thresholds are exceeded. All data are also made available for performing analyses. Data transfer takes place either via an optional modem or directly via the fieldbus built into the WPI. The monitoring solution can be integrated in virtually any bus environment, including Profinet, Profibus, Modbus or CAN.
There are two versions available, depending on whether the system is to be introduced as a retrofit or is to be part of the electrical design. The box solution is suitable for retrofitting and comes with a fully preassembled control cabinet ready for mounting in the hub. The SD card solution addresses users who want to install the controller and I/O modules into the pitch control cabinets.
Phone: 1300 786 411
VECOW AIC-110 IoT gateway
Backplane Systems Technology is pleased to present VECOW’s AIC-110.
Bonfiglioli 700TW Series planetary gearbox
The Bonfiglioli 700TW Series planetary gearbox is the company's new-generation Yaw Drive...
Tindo Walara series N-Type solar panels
Tindo's Walara Series of solar modules is designed for the Australian climate using n-type...